Brands
Latest top stories
Start-ups
Technology

LeydenJar takes its pure-silicon anode from lab to factory

18 November 2026

Silyte™, LeydenJar's proprietary pure silicon anode material, significantly increases the energy density of lithium-ion batteries (images: LeydenJar) 

 

The Dutch battery materials company LeydenJar has won Deloitte’s 2026 Deep-Tech Award for Silyte, a pure-silicon anode designed to boost the energy density of lithium-ion batteries. With ambitions to become a critical supplier to battery makers worldwide, starting with consumer electronics, the company plans to scale up commercial production in Eindhoven next year.

Christian Rood, LeydenJar’s co-founder, frames that ambition in terms familiar to his home city. Speaking to the BBC in September, he likened the company’s strategy to that of ASML, the Eindhoven-based manufacturer of the lithography machines chipmakers rely on to pattern semiconductors. LeydenJar’s offering is a roll of silicon-coated copper foil that cell manufacturers can cut to size and integrate directly into their own batteries.

Deloitte presented the award on 5 November at the National Maritime Museum in Amsterdam, after a judging panel assessed contenders on innovation, commercial potential and scalability in the battery industry. Yet the manufacturing process the judges commended had its origins in a problem belonging to an entirely different sector.

 

From solar cells to silicon anodes

 

Researchers at the Energy Research Centre of the Netherlands (ECN) had developed a method for depositing silicon that ultimately proved unsuitable for thin-film solar cells. In 2016, Christian Rood and Gabriel de Scheemaker spun LeydenJar out of ECN to repurpose the technique for batteries, an arena where silicon’s remarkable capacity to store charge comes with a stubborn mechanical flaw.

In theory, a gram of silicon can hold nearly 10 times as much electrical charge as a gram of graphite, the material conventionally used in lithium-ion anodes. Yet silicon swells dramatically as it absorbs lithium during charging and contracts as it releases it. Over repeated cycles, that expansion causes the material to crack, degrading the cell’s capacity.

To overcome this, LeydenJar uses plasma-enhanced chemical vapour deposition (a technique borrowed from semiconductor manufacturing) to grow porous silicon columns directly onto a moving strip of copper foil. The microscopic pores give the silicon room to expand without fracturing, while the single dry deposition step eliminates the slurry mixing, wet coating and energy-intensive drying required to make conventional graphite electrodes.

 

From early cells to customer trials

 

In 2020, LeydenJar reported that its prototype pouch cells lasted for more than 100 cycles. By February 2025, the company said test cells retained 80% of their original capacity after 500 cycles, without needing the heavy external compression typically required to keep silicon anodes intact. It formally launched Silyte that August, before announcing a partnership with the battery manufacturer Highpower Technology in October. By then, the two companies said they had already shipped thousands of prototypes to consumer electronics firms for evaluation.

LeydenJar says Silyte can increase the amount of energy stored in a given volume by up to 50%. In March 2026, it reported an energy density of 1,350 watt-hours per litre for the internal stack of a cell, a figure that excludes the outer packaging.

 

Scaling anode production at PlantOne

 

LeydenJar chose a former Philips manufacturing site in Eindhoven for its PlantOne facility after signing a €30m financing agreement with the European Investment Bank in 2022. In January 2026, it secured a further €43m funding package, comprising equity, grants and loans, alongside €10m from an unnamed US electronics company to pay for production equipment.

By August, the company said PlantOne was turning out commercial anode rolls. It also launched an evaluation programme built around a 27mm by 27mm reference cell, built by manufacturing partners for smartwatches and other compact wearables. At its planned annual capacity, the factory will produce enough foil for 70 megawatt-hours of battery capacity.

The raw inputs required to make the foil also shape its environmental footprint. A 2023 study commissioned by LeydenJar and carried out by the sustainability consultancy Minviro modelled up to 85% lower greenhouse gas emissions for its anode production compared with conventional graphite alternatives. The assessment identified the precursor gas used to deposit the silicon and the copper foil itself as the primary sources of emissions in the process.

 

A supplier’s role in Europe’s battery industry

 

LeydenJar’s push into commercial production comes at what seems to be a bad time for Europe’s battery ambitions, following the bankruptcies of two high-profile cell makers: Sweden’s Northvolt in March 2025 and Norway’s Morrow Batteries in May 2026. The International Energy Agency estimates that China manufactured more than 80% of the world’s battery cells in 2025, as well as more than 90% of the active material used in electric-vehicle anodes. Switching from graphite to silicon alters what cell makers buy, yet silicon processing remains heavily concentrated too. According to the US Geological Survey, China accounted for 87% of global silicon metal production in 2025.

Against that backdrop, LeydenJar is betting that Europe’s strength lies not in trying to outbuild Asian gigafactories, but in supplying indispensable components to them. Its partnership with Highpower Technology, a Shenzhen-based lithium-ion battery manufacturer that supplies major global consumer electronics brands, shows how a Dutch material can enter the market through established factories already operating at scale.

Ultimately, that strategy will be won or lost on the factory floor in Eindhoven. For a cell maker qualifying Silyte for a next-generation device, laboratory breakthroughs count for little unless the roll of silicon foil delivered next year performs identically to the sample tested today. If LeydenJar can prove that consistency at industrial scale, it may yet carve out a vital, ASML-style foothold at the heart of the global battery supply chain.

 

 

 

Liked this article? You can support our independent journalism via our page on Buy Me a Coffee. It helps keep MoveTheNeedle.news focused on depth, not clicks.

👉 https://buymeacoffee.com/movetheneedle.news